Notes: 1.All dimensions are in millimeters
2.Tolerances unless dimensions ±0.1mm


Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Units
Collector-Emitter Voltage VCEO 30 V
Emitter-Collector-Voltage VECO 5 V
Collector Current IC 20 mA
Operating Temperature Topr -25 ~ +85 ℃
Storage Temperature Tstg -40 ~ +85 ℃
Soldering Temperature *1 Tsol 260 ℃
Power Dissipation at(or below)
25℃Free Air Temperature
Pc 75 mW
Notes: *1:Soldering time≦5 seconds.
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition